电磁铁选型,"均匀度"这三个字一定要问到底|SeeweTek | Magnetic Field Generators, Magnetic Testing Solutions, Physical Property Testing Solutions

电磁铁选型,"均匀度"这三个字一定要问到底

很多老师选电磁铁只问最大磁场,忽略了一个更影响数据质量的指标——均匀区@均匀度。均匀度标5%还是2%,样品区域的磁场一致性差一倍还多。

High-Precision Single-Yoke Electromagnet Promotional Poster.jpg

Many teachers ask only about the maximum magnetic field when choosing an electromagnet, overlooking a metric that affects data quality even more: the uniform zone @ uniformity. Whether uniformity is specified at 5% or 2%, the magnetic field consistency across the sample area differs by more than a factor of two.

These practices from the SeeweTek vertical/horizontal dual-adjustment single-yoke electromagnet are worth considering:



① Simulation down to the current-sweep level: rather than simulating a single operating point, magnetic field distribution contour maps and radial/axial distribution curves are provided for each of the four excitation currents—6.3A/12.5A/18.8A/25.4A—so the simulation covers whichever current you use in your experiment.

② Contour lines at 2% intervals: the radial magnetic field distribution map is plotted with contour lines at 2%×B0, making the boundary of the uniform zone immediately clear. The central magnetic field is oriented horizontally; at 6.3A, B0=253.8mT, and at higher excitation the field can reach the 800mT range.

③ Sufficient structural adjustment margin: the air gap is bidirectionally adjustable from 0 to 80mm, and the Φ90→Φ60 tapered pole tips are interchangeable—use a small air gap for strong fields and a large pole face for large samples, so one unit covers multiple types of experiments.



Magnetic material measurement, Hall/magnetoresistive/magneto-optical effects, magnetostriction, VSM, magnetization and demagnetization—for this platform-type equipment for magnetism research, it is worth setting the uniformity requirement a little higher.