
1. Magnetic Circuit Design: The Source of Cost-Effectiveness of the Single-Yoke Bipolar Structure
The core contradiction of an electromagnet is the trade-off between "magnetic field strength" and "power consumption." This device adopts a single-yoke bipolar structure: the excitation coils are mounted on both sides of the yoke, and the magnetic flux closes through the yoke. Compared with an open magnetic circuit, the closed magnetic circuit greatly reduces magnetic reluctance, significantly improving the utilization efficiency of the central air-gap magnetic field relative to the ampere-turns—stronger magnetic field per unit of power, less heat generation. This is precisely the structural basis of the "high magnetic field/power ratio."
2. Experimental Freedom Brought by "Dual Adjustment"
Adjustable air gap: The air gap is the primary variable of an electromagnet's magnetic field strength. A small air gap yields high field strength (suitable for scenarios such as electrochemical catalysis that require tesla-level magnetic fields), while a large air gap provides greater experimental space and a larger uniform region;
Adjustable pole tips: With pole tips of different shapes (flat/conical/special-shaped), it can switch between the two modes of "high field strength" and "high uniformity."
Before delivery, SeeweTek outputs magnetic field distribution simulation data for different air-gap settings—the uniform region is not a vague specification, but a "visualized map" that changes with the air gap. Customers select configurations according to the map, which is a direct manifestation of the value of simulation large models.
3. Heat Dissipation Design: The Necessity of Water Cooling
The heating power of an electromagnet is approximately I²R; a strong magnetic field means high current, and thermal management is not a bonus but a matter of survival. This device adopts water-cooled windings, and the cooling water circuit is designed according to "precise power calculation"—the heat generation is calculated first, and then the cooling capacity is matched, avoiding "guesswork-based design margins." The actual benefit is: under long-term full-load conditions, the winding temperature rise is controllable, magnetic field drift is small, and experimental continuity is good.
4. Why Is It Needed for Electrochemical Catalysis?
Magnetic field experiments in the field of electrochemical catalysis have several typical requirements: the magnetic field must be strong enough (affecting catalytic pathways and mass transfer processes), the space must accommodate the reaction cell (the air gap cannot be too small), the duration must be long (catalytic reactions often run for hours), and the magnetic field must be stable enough (temperature drift directly contaminates data). The configuration of single-yoke, bipolar, dual-adjustable, water-cooled precisely responds to these four requirements one by one.
The competitiveness of an electromagnet = magnetic circuit efficiency × adjustment freedom × thermal management capability. These three correspond respectively to "power saving, ease of use, and durability." The selling points of this SeeweTek device are clear, and they are also the confidence behind its delivery to a high-level platform such as Xi'an Jiaotong University.